| After-sales Service: | Standard Aftersales Services |
|---|---|
| Warranty: | 12 Months |
| Type: | Seamless |
| Technique: | Hot Rolled |
| Material: | Carbon Steel |
| Surface Treatment: | Black |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
ASTM A213 Grade T2 T5, ASTM A213 Grade T9, ASTM A213 Grade T11, ASTM A213 Grade T22, ASTM A213 Grade T91.
ASTM A213 seamless pipes tubes Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. The tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test.
| Grade | SA 213 T2 Tube (With IBR Certificate) |
| UNS | UNS K11547 |
| SA 213 T2 Tube Size Range |
|
| SA 213 T2 Heat Exchanger and Boiler Tube | up to 19.6 meters |
| ASTM A213 T2 Furnace Tubes | 2"-9" diameters, Length: up to 70ft |
| SA 213 T2 Welded Tubes | 1/2" NB - 24" NB |
| Alloy Steel T2 Finned Tubes | (16 or 19 fins/ inch) |
| Wall Thickness of SA 213 T2 Tube | 4.5mm to 60mm |
| SA 213 Gr T2 Tube end |
BE -Beveled end, BLE -Bevel large end, BSE -Bevel small end, TOE -Treaded One End, BOE-Beveled One End, TBE -Treaded Both Ends, Coupled, BBE -Bevel both ends, PBE -Plain Both Ends, POE -Plain One End |
| A213 T2 Tube Length | 12000mm, SRL, 20FT, Custom Length, Single Random Length (SRL), Double Random Length (DRL), 3000mm, 2000mm, 6000mm, DRL, 40FT |
| SA 213 T2 Tube Wall Thickness | SCH-80S, SCH160, SCH-10S, SCH-80, SCH-40, SCH-10, SCH-40S, SCH-XXS, SCH-STD, SCH-XS, SCH-5, SCH-5S |
| Surface Treatment of SA213 T2 Tube |
|
| Processing Service of T2 Steel Tube | Decoiling, Punching, Cutting, Painting, Coating, Welding, Bending |
| Marking by T2 Tube suppliers |
SA 213 T2 Seamless Tube Marking Sample: Manufacturer Name ASTM A213 T2 2" x 0.250" x 20" TUBE SEAMLESS HEAT NO. XXXX |
|
Different methods used by SA 213 T2 Tube manufacturers |
Fabricated, Electric Resistance Welded (ERW), Welded, Extrusion, Longitudinally Submerged Arc Welded (LSAW), Electro Fusion Seam Welded (EFSW), CDW, 100% X Ray/ Gamma Ray Welded, Hot Finish Seamless (HFS), Horizontal Submerged Arc Welded (HSAW), Submerged Arc Welded (SAW), Cold Drawn Seamless (CDS), Seamless |
| Approvals | ONGC, BP, PED, EIL, KNPC, IBR, ISO 17025 for Laboratories, Saudi Aramco, AD2000, Merkblatt W0, NORSOK M-650, Shell, L&T, PED 97/23/EC, HAF 604 |
| Origin of ASTM A213 T2 Tube material | USA, Japanese, Latin-American, Asian, Africa, UK, European, American, Korean, Gulf, Chinese, Russian, Indian, Japan, Ukraine |
| Ask for these certificates from SA 213 T2 Tube suppliers | Sour-Service, SSC, IBR, NACE, EN-10204:3.2, HIC, EN-10204:3.1 |
| Equivalent Standards | SAE, GB, AWWA, EN, DIN, ISO, SS, UNI, GOST, KS, CSA, JIS, IS, API, BS, ASTM, AISI, NFA, ANSI |
| Various Testing performed by T2 Boiler Tube manufacturers |
Ultrasonic Test, Impact, Ferrite, Straightness, Charpy V Impact Test, Fine Grain, Ultrasonic, HIC- Hydrogen-induced Cracking, H2 SERVICE, TM0284, Micro, Metallurgical & Stereo Microscopy, Hardness, Flux Leakage examination or Magnetic Flaw detection, Mechanical, Hardness Test, SSC- Sulfide Stress Corrosion Cracking, Hydro test, IGC- Intergranular Corrosion Test, Salt Spray Test to test Phosphating, Tensile, Radiography, Eddy current, TM0177, Stress , Positive Material Identification (PMI), Bend TestBend test / Guided Bend, NACE MR0175, Surface Roughness Test, Macro, Chemical, Burst Test, Non Destructive Testing , IBR, Creep, Charpy V-Notch Test |
| Additional Services and Facility | Sawing, Cutting, Polishing, Laser/ Water Jet Cutting, Threading, Beveling, Tapping |
| Material Test Certificate (MTC) provided by T2 Tubing suppliers |
PED, EN 10204 3.1, Radiographic Testing (RT), ISO 14001:2015, IBR, NDE, Ultrasonic Testing (UT), EIL, ISO 9001:2005 |
| Supplier of SA 213 T2 Tube in various shapes | Round, Hollow, Hydraulic, Triangle, Square, Rhomboid, Oval, Semi-Rhomboid, Rectangle Hollow, Elliptical, U-Bend, Semi-Round, Semi-oval |
| Product Name | ASTM SA 213 T2 Heat Exchanger Tube Hot Finished Pipe Ferritic Alloy Mainly Used For Making Steel Boiler Tube |
| Standard | ASME-SA106, ASME SA-192M, ASME SA-209M, ASME SA-210M, SAME SA-213M, SAEM SA333M, ASTM A106M, ASTM A192M, ASTM A210M, ASTM A213M, ASTM A335M, EN10216-2, DIN 1715, JIS G 3456,JIS G 3461, JIS G 3462, GB 3087,GB 5310, GB 6479, GB9948, GB/T 13296 |
| Grade | SA-106B/C, SA-192, SA-179,SA-210A1/C 10, 20, 20G, 20MnG, 25MnG P265GH, P195GH, P235GH, ST35.8, DT45.8 |
| Usage | For manufacture wall panel, economizer, reheater,superheater and steam pipeline of boilers |
| MOQ | 5Tons/Size |
| Dimension | 10.00mm~1422.00mm |
| End Tpye | Plain end |
| Surface | Bare, Slightly Oiled, Customed |
Shandong Xuanlin Metal Materials Co., Ltd., was founded in 2008, covers an area of 10, 000 square metres. We are a professional manufacturing and trading company of metal building materials. We currently sell domestically and export worldwide to places such as Africa, North America and the Middle East. Our main products are aluminum foil, electrical cable, copper tube, boiler tube, casing pipe, honed tube, steel wires, PPGI/gi coil, galvanized pipe, steel structures. We have more than 30 production lines which can produce customize according to your requirements.
We ensure product quality through systematic testing with technically advanced equipment. Our company has a rang of well established long-term relationships with many domestic steel companies including Bao Steel Group, Hengyang Group, Yieh Phui(China) and Ma Steel Trading. Our advantage is that we are close to national highways and high speeds, 100 kilometers from Jinan Airport and 350 kilometers Tianjin Port...The benefits of light weight, low cost, high corrosion resistance and easy installation with short construction periods have LED to steel structures becoming more widly used in modern building construction with varied applications such as factory workshops, supermarkets, cold storage rooms, plazas, villas and more.
We look forward to building successful business relationships with customers around the world.
Q. Are you a factory or a pure trading company?
A: We are a factory.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}